Installation Note N9010-90065 21Installation ProcedureTop Brace1. Refer to Figure 9. To remove the top brace (1), use the T-10 driver to remove the eightpanhead screws (3) (0515-0372), four on each side, attaching the brace to the chassis. Alsoremove and discard the twelve flathead screws (4) (0515-1946) attaching the top brace to theboards.Figure 9 Top Brace Removal


Contents tools required installation procedure	Installation Note N9010-90065 21Installation ProcedureTop Brace1. Refer to Figure 9. To remove the top brace (1), use the T-10 driver to remove the eightpanhead screws (3) (0515-0372), four on each side, attaching the brace to the chassis. Alsoremove and discard the twelve flathead screws (4) (0515-1946) attaching the top brace to theboards.Figure 9 Top Brace Removal Previous Next / 46

Keysight Technologies N9010B Installation Note