Keysight Technologies X Series User Manual
Also see for X Series: Installation noteMeasurement guideInstallation noteSecurity Features and Document of VolatilityService guide
                  | |
Contents
| 
1 Keysight Connector KitRF Input 1, 2.4 mm adaptor installationRF Input 1, 2.4 mm adaptor installationAlign the adaptor with the 2.4 mm input connector on the instrument and engage thenut of the input connector with the adaptor.Torque the bulkhead 2.4 mm input connector (with an 8 mm or 5/16" torque wrench)to 8 inch-pounds while holding the adaptor with a 7 mm open-end wrench.Refer to "Connector Care" on page 11.10 User's Guide |
Related manuals for Keysight Technologies X Series
Keysight Technologies 8710-2819 User Manual
Keysight Technologies 11857B User's And Service Manual
Keysight Technologies 11667A User's And Service Manual
Keysight Technologies 85133D Operating And Service Manual
Keysight Technologies N9355B Operating And Service Manual
Keysight Technologies 85133E Operating And Service Manual
Keysight Technologies 11667B Operating And Service Manual
Keysight Technologies 85131C Operating And Service Manual
Keysight Technologies 11667B Operating And Service Manual
Keysight Technologies 85131E Operating And Service Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine