3 Operation of components3. Operation of components3.1 Safety components▅ Start the engine at the neutral positionIt is the safety component to avoid the suddenstart of loader when engine starts. It is allowedto start the engine only when forward andbackward operating lever are at the neutralposition. Return the operating lever to theneutral position in order to disconnect the loaderwith engine after parking.▅Lock button of operating lever of bucketIt is used to lock the operating lever of bucket.Place the operating lever of bucket to theneutral position and enter down the lock buttonto lock the operating lever.Operating lever of bucket▆ Stop brakeIt is used to stop or park the loader. Stop brakeis activated by pressing down the button of stopbrake and alert indicator on the panel lights. Itis mainly used when loader is stopped, servicedor transported or driver leaves the loader.Take all required measures for stop brake.Loader cannot start if stop button is notreleased.▅Lock connectionIt is used to lock the front and rear carriages toavoid unintended turning of them during check,maintenance and transportation. Mount it onseats of front and rear carriages at the lower leftand fix it with split pin. Then front and rearcarriages are aligned. Remove the connectionlock before loader drives normally and hide it in thefront carriage. Drive with active lock connectionwill invalidate the steering wheel and lead to risks.Hidden space▆Support of lifting cylinderIt is used to support the moving arm during thecheck on lifted moving arm. It aims to prevent thedescent of moving arm. It is hidden in the frontcarriage.[Handling]1. Raise the lifting cylinder to top.2. Stop the running engine and take away the startkey.3. Raise the piston rod of cylinder to approach thesupport.4. Insert the pin to fix it.5. Lower the moving arm slowly till no gap is left.Operating leverof bucket10Support device of lifting cylinderStop button