L-1 Identity Solutions 4G Lite Installation Manual
                                                                                    | |
Contents
| 
Part # 430-4G-050-00-005© 2011 - L-1 Identity Solutions Inc. All rights reservedPlanning the InstallationIf you have any unresolved issues with the items on this list, contact L-1 Identity SolutionsTechnical Support for additional information before beginning any installation.WARNING4G Lite devices should be installed by only a qualifiedtechnician. If you are not qualified to perform aninstallation task, call L-1 Identity Solutions TechnicalSupport or contact a qualified installer.2.1.1 RECOMENDED STEPS FOR A SUCCESSFUL INSTALLATIONEvery installation is unique. Sometimes the issues are well defined and can be handled in astandard fashion; sometimes the issues are very specific and may not be immediatelyrecognizable.L-1 Identity Solutions recommends following these steps for a successful installation: Plan the installation - Choose the type of hardware required, decide if anetwork is required, and decide on the location and number of requireddevices. Unpack all items - Unpack all items and check against the packing list. Install network hardware components - Install the cabling andcomponents needed to run the system. Install software - Install the software needed to set up the devices. Preconfigure device - Connect the device to the USB cable, supply powerto the device, and preconfigure the device. Mount devices - Mount the devices in their final locations Power distribution and device hook up - Connect the device wiring viathe back panel. Power-up procedure - Check the power connections and start the systemsafely. Enroll users into the system (for user enrollment procedures).Chapters 3 through 7 in this document present more information on these steps.17 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine