ARCSII_UM_EN_3.0 w w w . l - a c o u s t i c s . c o m 154.4 Connecting SB28 to LA8Maximum of 4 enclosures per LA81 SB28 can be connected to each output channel on the LA8.CARDIOID configuration with SB28Connect the reversed subwoofer to OUT 1.Impedance load1 enclosure 4 ΩOption A Connect a DO (DO.7, DO10 or DO25) cable to the LA8 PA-COM® connector. Use the DOSUB-LA8 to split the audio signals into four channels, each one feeding one subwoofer.

safety instructions

ARCS II SYSTEM

SYSTEM COMPONENTS

LOUDSPEAKER CONFIGURATIONS

Line source with low-frequency element

LOUDSPEAKER CONNECTION

Connecting ARCS ® II to LA4X

Connecting SB28 to LA8

ARCS II]

APPENDIX B RECOMMANDATION FOR SPEAKER CABLES

specifications

L-Acoustics ARCS II User Manual

ARCS II

RIGGING SYSTEM

MECHANICAL SAFETY

SYSTEM SET-UP

RIGGING PROCEDURES

B. Installing the BUMP3 rigging bar(s)

C. Installing the LIFTBAR rigging bar

D. Installing the ARCBUMP flying frame

E. Preparing the BUMP3/ARCOUPL assembly