L-Acoustics KIBUII Rigging Manual

L-Acoustics KIBUII Rigging Manual Manual pdf 4 page image

SafetySafetyInstructionsInspect the product before operation.If any sign of defect or damage is detected, immediately withdraw the product from use for maintenance.Never incorporate equipment or accessories not approved by L-Acoustics.Read all the related PRODUCT INFORMATION documents shipped with the products beforeexploiting the system.Do not store the product on an unstable cart, stand, tripod, bracket, or table.Work with qualied personnel for rigging the systemInstallation should only be carried out by qualied personnel that are familiar with the rigging techniques andsafety recommendations outlined in this manual.Ensure personnel health and safetyDuring installation and set-up personnel must wear protective headgear and footwear at all times. Under nocircumstances is personnel allowed to climb on a loudspeaker assembly.Respect the Working Load Limit (WLL) of third party equipment.L-Acoustics is not responsible for any rigging equipment and accessories provided by third party manufacturers.Verify that the Working Load Limit (WLL) of the suspension points, chain hoists and all additional hardwarerigging accessories is respected.Respect the maximum congurations and the recommended safety precautions.For safety issue, respect the maximum congurations outlined in this manual. To check the conformity ofany conguration in regards with the safety precautions recommended by L-Acoustics, model the system inSoundvision and refer to the warnings in Mechanical Data section.Be cautious when ying a loudspeaker conguration.Always verify that no one is standing underneath the loudspeaker array when it is being raised. As the arrayis being raised, check each individual element to make sure that it is securely fastened to the adjacent element.Never leave the array unattended during the installation process.As a general rule, L-Acoustics recommends the use of safety slings at all times.Be cautious when ground-stacking a loudspeaker array.Do not stack the loudspeaker array on unstable ground or surface. If the array is stacked on a structure, platform,or stage, always check that the latter can support the total weight of the array.As a general rule, L-Acoustics recommends the use of safety straps at all times.Risk of falling objectsVerify that no unattached items remain on the array.Risk of tippingRemove all rigging accessories before transporting an array.Take into account the wind effects on dynamic load.When a loudspeaker assembly is deployed in an open air environment, wind can produce dynamic stress to therigging components and suspension points.If the wind force exceeds 6 bft (Beaufort scale), lower down and/or secure the loudspeaker array.This system is intended for professional use.Read the USER MANUAL before operating the system.Use the loudspeaker system components described in the user manual and follow the operating instructions.Kiva II rigging manual (EN) version 2.0 4