L-Acoustics KIVA II Owner's Manual

Also see for KIVA II: Manual Owner's manual

L-Acoustics KIVA II Owner's Manual Manual pdf 5 page image

SafetySafetyInstructionsInspect the system before any deployment.Perform safety related checks and inspections before any deployment.Perform preventive maintenance at least once a year.Refer to the preventive maintenance section for a list of actions and their periodicity.Insufcient upkeep of the product can void the warranty.If any safety issue is detected during inspection, do not use the product before performingcorrective maintenance.Check for issues. A rigging system part or fastener is missing or loose. A rigging system part exhibits: bends,breaks, broken parts, corrosion, cracks, cracks in welded joints, deformation, denting, wear, holes. A safety cueor label is missing. A loose part is not adequately secured.Never incorporate equipment or accessories not approved by L-Acoustics.Read all the related PRODUCT INFORMATION documents shipped with the products beforeexploiting the system.Do not store the product on an unstable cart, stand, tripod, bracket, or table.Beware of sound levels.Do not stay within close proximity of loudspeakers in operation.Loudspeaker systems are capable of producing very high sound pressure levels (SPL) which can instantaneouslylead to permanent hearing damage to performers, production crew and audience members. Hearing damagecan also occur at moderate level with prolonged exposure to sound.Check the applicable laws and regulations relating to maximum sound levels and exposure times.Work with qualied personnel for rigging the systemInstallation should only be carried out by qualied personnel that are familiar with the rigging techniques andsafety recommendations outlined in this manual.Ensure personnel health and safetyDuring installation and set-up personnel must wear protective headgear and footwear at all times. Under nocircumstances is personnel allowed to climb on a loudspeaker assembly.Respect the Working Load Limit (WLL) of third party equipment.L-Acoustics is not responsible for any rigging equipment and accessories provided by third party manufacturers.Verify that the Working Load Limit (WLL) of the suspension points, chain hoists and all additional hardwarerigging accessories is respected.Respect the maximum congurations and the recommended safety precautions.For safety issue, respect the maximum congurations outlined in this manual. To check the conformity ofany conguration in regards with the safety precautions recommended by L-Acoustics, model the system inSoundvision and refer to the warnings in Mechanical Data section.Be cautious when ying a loudspeaker conguration.Always verify that no one is standing underneath the loudspeaker array when it is being raised. As the arrayis being raised, check each individual element to make sure that it is securely fastened to the adjacent element.Never leave the array unattended during the installation process.As a general rule, L-Acoustics recommends the use of safety slings at all times.Be cautious when ground-stacking a loudspeaker array.Do not stack the loudspeaker array on unstable ground or surface. If the array is stacked on a structure, platform,or stage, always check that the latter can support the total weight of the array.As a general rule, L-Acoustics recommends the use of safety straps at all times.Kiva II owner's manual (EN) version 1.0 5