L-Acoustics LA 8 User Manual
Also see for LA8: Owner's manualOwner's manualUser manualUser manualUser manual
                                                                    | |
Contents
| 
OperationResetting the preset parametersAll preset parameters (including preset name) can be reset to the default values.‿RESET PRESET ‼※ OK ARE YOU SURE?OUTPUTS MUTED!OK 011:K1 100LF_A LF_A MF_A HF_AProcedure1. From the main menu, select PRESET PARAMETERS.2. Turn the encoder wheel to select RESET PRESET.3. Press the OK key or the encoder wheel to validate.The amplied controller displays ARE YOU SURE? OUTPUTS MUTED!.4. Press the OK key or the encoder wheel to validate (or the ESC key to cancel).Resetting the parameters of a user preset (stored in memory space 001 to 010) only affects the currentparameters.To reset the parameters of a stored preset, overwrite the memory space after resetting the preset. Refer toSTORE PRESET (p.45).CLEAR GRP PARAMSGroup parameters (names, gains, delays, contour EQs) are dened in LA Network Manager and cannot be accessedfrom the amplied controller. They remain active when the amplied controller is disconnected from the computerrunning LA Network Manager (in standalone mode), and when the amplied controller is shut down or restarted. Groupparameters are not preset-dependent and remain active when a different preset is loaded.Therefore, L-Acoustics recommends to clear group parameters when an amplied controller is used in standalone modeafter being used within a network.To verify if output channels are assigned to a group, refer to Displaying input level, input selection, input mode and groupinformation (p.40).CLEAR GRP PARAMS does not clear the preset parameters. Refer to PRESET PARAMETERS (p.46)Clearing the group parameters‿CLEAR GRP PARAMSINPUT SETTINGS‼※ OK ARE YOU SURE?OUTPUTS MUTED!OK 011:K1 100LF_A LF_A MF_A HF_AProcedure1. From the main menu, select CLEAR GRP PARAMS.The amplied controller displays L-NET ACTIVE. CANNOT CLEAR when the amplied controller isconnected to the L-NET network. Group parameters cannot be cleared when the amplied controller isremotely controlled by LA Network Manager.Press the ESC key to cancel.The amplied controller displays NO GROUP DEFINED. CANNOT CLEAR when the amplied controller isnot assigned to any group.Press the ESC key to cancel.2. Press the OK key or the encoder wheel to validate.The amplied controller displays ARE YOU SURE? OUTPUTS MUTED!.3. Press the OK key or the encoder wheel to validate (or press the ESC key to cancel).LA8 user manual (EN) version 13.1 48 |
Related manuals for L-Acoustics LA8
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine