LA8_MM1_EN_2.0 w w w . l - a c o u s t i c s . c o m 1 7 / 21D/R 002 – FOAM FILTERSpare partsKR LAXMOUNo Description Qty1 foam filter 1Cleaning or replacement procedureThis procedure describes how to clean or replace the FOAM FILTER of an LA8 amplified controller.Pull on a FRONT FRAME side without removing it from the controller.1.Do the same on the other side.2.Remove the FOAM FILTER.3.If the FOAM FILTER is intended to be cleaned, use mild dishwashing detergent or soap and then dry it.4.Place a FOAM FILTER between the FRONT FRAME and the controller.5.Push the FRONT FRAME on both sides until it is fully inserted.6.A click must be heard on each side.