L-Acoustics dV-DOSC Operator's Manual
Also see for dV-DOSC: Operator's manual
                                                                                                                                 | |
Contents
| 
dV-DOSC dV-SUB Manual V2.0 Nov 2001 191.1 dV-DOSC SYSTEM COMPONENTS(1) dV-DOSCActive 2-way loudspeaker enclosure, meeting Wavefront Sculpture Technology criteria, withcoplanar symmetric arrangement of loudspeaker components(2) dV-SUBCompanion subwoofer for dV-DOSC with three 15-inch components mounted in a ventedbandpass configuration.RIGGING(3) dV-BUMPFlying bumper for rigging dV-DOSC and/or dV-SUB. When combined with the V-DOSCBUMPER, can be used as a stacking platform or for rigging dV-DOSC on top of V-DOSC(4) dV-DOWNPair of flying bars for rigging dV-DOSC underneath V-DOSC(5) dV-PIN25Locking quick release pin (25 mm grip length) for physically interconnecting dV-DOSC or dV-SUB enclosures. Six dV-PIN25 are required per 2 dV-DOSC enclosures along with 2 dV-ANGLE(P1 or P2) bars.(6) dV-PIN 81Locking quick release pin (81 mm grip length) for physically connecting dV-DOSC to dV-DOWN(7) dV-ANGLEP1, dV-ANGLEP2Rear angle bar used to form convex (positive curvature) arrays. Available angles include:P1: 0, 2, 3.75, 5.5, 7.5 degreesP2: 1, 3, 4.5, 6.5 degrees(8) dV-ANGLENRear angle bar used to form concave (negative curvature) arrays or for downwards tilt ofstacked dV-DOSC systems. Available angles include: 0, -2, -3.75, -5.5 and -7.5 degrees(9) dV-ANGLESSFront and rear angle bar used to rig dV-SUB to dV-SUB (i.e., SS=sub to sub)(10) dV-ANGLESDFront angle bar used to rig dV-DOSC to dV-SUB (i.e., SD=sub to dV) or dV-SUB to dV-BUMP(11) dV-ANGLESDPRear angle bar used to rig dV-DOSC to dV-SUB (i.e., SDP=sub to dV, positive tilt). Availableangles include: 0, 1.75, 3.75 degrees.(12) FLIGHT-dVFlight case for transport of three dV-DOSC enclosures(13) dV-SUBPLADolley board for dV-SUB(14) dV-SUBCOVProtective cover for dV-SUBCABLING(15) SUB CABLE (DOSUB)Subwoofer loudspeaker cable, 5 m (16 ft) length, with male 8 pin CA-COM connector and fourSpeakon connectors (for connecting 4x dV-SUB or 4x SB218 subwoofers to amplifier racks) |
Related manuals for L-Acoustics dV-DOSC
manualsdatabase
Your AI-powered manual search engine