L.B. White CP125CK Owner's Manual

Contents

L.B. White CP125CK Owner's Manual Manual pdf 13 page image

NOZZLECLEAN NOZZLE AS NEEDED(For Models CP125CK and CP170CK only)- Remove upper shell (See Air Intake Filter, page 12).- Remove fan blade (See Fan Blades).- Remove fuel and air line hoses from nozzle adaptor.- Remove ignitor wire from spark plug.- Remove spark plug from nozzle adaptor using mediumphillips screwdriver.- Turn nozzle adaptor 1/9 turn(40°) to counter clock wiseand pull toward motor to remove. (See Figure 12)- Place plastic hex-body into vise and lightlry tighten.- Carefully remove nozzle from burner head using 5/8”socket wrench.- Blow compressed air through face of nozzle.(this will remove any dirty in nozzle)- Reinstall nozzle into nozzle adaptor until nozzle seats.Tighten 1/3 turn more using 5/8” socket wrench.(40~45 inch-pounds)- Reinstall nozzle adaptor to burner head.- Reinstall spark plug to nozzle adaptor.- Attach ignitor wire to spark plug.- Attach fuel and air line hoses to nozzle adaptor.- Reinstall fan blade and upper shell.413FFiigguurree 1122 –– NNoozzzzllee RReeppllaacceemmeenntt FFoorr MMooddeellss CCPP112255CKK aanndd CCPP117700CKKMAINTENANCE (cont.)FFiigguurree 1133 – NNoozzzzllee RReeppllaacceemmeenntt CCPP221100CKKScrewCombustion ChamberIgnitor WireSpark PlugNozzle AdaptorAir LineFuel LineBurner HeadNozzle AdaptorNozzle FaceNozzleNozzle AdaptorFuel LineAir LineNozzle AdaptorCombustion ChamberScrewIgnitor WireSpark PlugBracket-BurnerNozzle AdaptorNozzle FaceNozzleNozzle Adaptor(For Model CP210CK Only)- Remove upper shell (See Air Intake Filter, page 12).- Remove fan blade (See Fan Blades).- Remove fuel and air line hoses from nozzle adaptor.- Remove ignitor wire from spark plug.- Remove spark plug from nozzle adaptor using mediumphillips screwdriver.- Turn nozzle adaptor 1/8 turn (45°) to counter clock wiseand pull toward motor to remove. (See Figure 13)- Place plastic hex-body into vise and lightly tighten.- Carefully remove nozzle from adaptor-nozzle using 5/8”socket wrench.- Blow compressed air through face of nozzle.(this will remove any dirt in nozzle)- Reinstall nozzle into nozzle adaptor until nozzle seatsTighten 1/3 turn more using 5/8” socket wrench(40~45 inch-pounds)- Reinstall nozzle adaptor to burner bracket- Reinstall spark plug to nozzle adaptor.- Attach ignitor wire to spark plug.- Attach fuel and air line hoses to nozzle adaptor.- Reinstall fan blade and upper shell.