L.B. White Workman CV100N Owner's Manual And Instructions
                  | |
IGNITERKNOBVALVE, PILOT SAFETYPILOTONOFFONOFF9Start-Up Instructions1. Open the fuel supply valve to the heater.2. Position indicator on knob of pilot safety control topilot.Fig. 13. Fully depress knob on valve while pushing igniterbutton.ATTENTIONOn new installations it may take a short time for gas topurge out any air in the pilot line before the pilot stays lit.4. Keep the pilot knob depressed for about 30 secondsto allow the thermocouple to warmup so the pilotstays lit after the pilot knob is released.5. When pilot remains lit, position knob to on. Mainburner will light.WARNINGBurn Hazard■ Close the manual main burner valve before lighting thepilot.■ Failure to do so will result in the main burner ignitingwhen the pilot is being lit.■ Serious injury or death due to burns may occur.Shut-Down Instructions1. Close all fuel supply valves.2. Allow the heater to burn off any fuel gas remaining onthe gas supply line.3. Depress the knob slightly while turning knob to OFFposition.4. Disconnect the heater from its gas supply. |
Related manuals for L.B. White Workman 100 Plus
L.B. White Workman CV225 Owner's Manual And Instructions
L.B. White Workman CV225 Owner's Manual And Instructions
L.B. White CV100 Owner's Manual And Instructions
L.B. White I3 Owner's Manual And Instructions
L.B. White AD100 Owner's Manual And Instructions
L.B. White I17 Owner's Manual And Instructions
L.B. White I-3 Owner's Manual And Instructions
L.B. White I17 Owner's Manual And Instructions
L.B. White CP400 Owner's Manual And Instructions
L.B. White CR035 Owner's Manual And Instructions
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine