15 2.1: Configuration L-502.2.1.2. The configuration of the outputs DAC1 and DAC2345678910No jumper on 3,4,5,6 The contact "DAC1" is notconnected to the external signalconnector, see item 4.2.1, p. 33Jumper on 3-4 The contact "DAC1" on theconnector is connected to theDAC - channel 1Jumper on 3-5 The contact "DAC1" on theconnector is connected to +15VJumper on 3-6 The contact "DAC1" on theconnector is connected to AGNDNo jumper on 7,8,9,10 The contact "DAC2" is notconnected on the connectorJumper on 7-8 The contact "DAC2" on theconnector is connected to theDAC - channel 2Jumper on 7-9 The contact "DAC2" on theconnector is connected to -15V.Jumper on 7-10 The contact "DAC2" on theconnector is connected to theDGND digital ground circuit.2.1.3. Configuring the resolution of the active state of the digital outputsFor version 1 or 2 :11 1213 14For version 3:Jumper on 11-12 Forced output enable of the low-order byte, see 4.2.3, p.36.No jumper on11-12The resolution of the low byteoutput depends on the programsetting.Jumper on 13-14 Forced output enable of highbyte.No jumper on13-14The output enable of the highbyte depends on the programconfiguration.
