L3 Aviation Products SDU L-3 Quick Start Manual
                                                                                                                                                                                     | |
Contents
| 
Airbus Iridium SATCOM System165E5733-00 L-3 Aviation Recorders ProprietaryIssue, Rev. 0221 January 2014Page 657.3 Configuring the Airbus Iridium SATCOM SystemThis section provides basic information on how to configure the Airbus Iridium SATCOMSystem.User access privileges are required to modify parameters as follows:Maintenance User – 5 ORT parametersAdministrator User – UAT parametersThe above listed users are required to log in with a user name and password and enterMaintenance Mode.Note: The aircraft status must be ‘On-Ground’ when Entering Maintenance Mode.The following sections are intended to provide you with information on the configuration processand data inputs required to install and verify a system as operational: For the purposes ofinstallation, system configuration and verification, the following steps should be completed:1. Address Book to upload2. ORT parameters for Maintenance User3. ICT file to upload4. UAT parameters for user roles7.3.1 Address BookThe Address Book can be uploaded as a comma-separated-values file (adb.csv) by theMaintenance User or Administrator User after login with a user name and password, andEntering Maintenance Mode when the aircraft status ‘On-Ground’.The Address Book can be viewed in the MUI by the Maintenance User or Administrator Userafter login in Operational Mode. Up to 300 Address Book entries can be made.Note: Address Book entries can be viewed and, if unprotected, modified via the MCDU inOperational Mode.The Address Book can be downloaded as ‘adb.csv’ file in the MUI (including modifications thathave been made via the MCDU) by the Maintenance User after login in Operational Mode.The following restrictions and limitations apply to the parameters of a compatible adb.csv file: Phone Number – up to 18 digits Name – up to 23 alphanumeric characters; A-Z, 0-9, +, -, /, space Priority – 4 (Public), 3 (Non-Safety), 2 (Safety), 1 (Emergency) Protected – 0 (No), 1 (Yes) Directory - 4 (Public), 3 (Non-Safety), 2 (Safety), 1 (Emergency) Speed Dial 1 - 1 Speed Dial 2 – 0 (currently not used) Speed Dial 3 – 0 (currently not used) |
manualsdatabase
Your AI-powered manual search engine