L3 comminications Stormscope II Series Pilot's Manual
Also see for Stormscope II Series: Pilot's guide
                                                                | |
Contents
| 
Stormscope®WX-1000 Pilot’s Guide3-8Chapter 3 – Operation3. Press the GO button to view the OPTIONS screen (figure3-7).4. Press the TEST button to run the operator-initiated selftest.The WX-1000 switches to the SELF-TEST screen (figure3-2 ) and begins the self test. The SELF TEST screendisplays the message SYSTEM TEST IN PROGRESS … forthe duration of the test (between 5 and 10 seconds).If the WX-1000 detects no faults, the SELF TEST screendisplays the message ALL TESTS ARE OK (figure 3-3 ).After a few seconds, the display switches back to theOPTIONS screen.If the WX-1000 detects a fault, an error message is dis-played. Refer to page 3-13 for more information on errormessages. Once you’ve pressed any button to acknowl-edge the error message, the display switches back to theOPTIONS screen.Use the Checklist FeatureBefore you can use the checklist feature, you must fill outchecklist worksheets (figure 3-8 ), then ask your S tormscopedealer to enter the checklists into your WX-1000 usingspecialized equipment. Keep a copy of the worksheets inyour aircraft at all times. Any time you want to changeyour checklists, have your dealer enter the changes.WX - 1000/1000+Checklist Worksheet78-8060-5815-8 (Rev. 01)Stormscope®Series IIWeather Mapping SystemsChecklist No. Aircraft Registration No.Title1.2.3.4.5.6.7.8.9.10.11InstructionsUse this worksheet to specifydesired checklist items to beprogrammed by your dealer in yourStormscope ®Series II WeatherMapping System, Model WX-1000or WX-1000+1. Enter checklist number and titleat the top.2. Enter aircraft registrationnumber.3. Enter desired checklist items inthe order in which you wantthem entered (one item perline).Figure 3-8. WX-1000 Checklist Worksheet SampleUse the Checklist Feature |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine