LA Fitness Runfit 99 Owner's Manual

LA Fitness Runfit 99 Owner's Manual Manual pdf 9 page image

8 2011/11/7 V1.1+V1.03 Caution3-1 Important Safety InstructionsWarning:To reduce the risk of burn, fire, electric shock, or physical injury, please read the importantsafety instructions and product information carefully before starting to use this product. Theowner of the treadmill should take on the responsibility to make sure that all the users can fullyunderstand the cautions and important safety instructions• Before starting any exercise/fitness program you should consult with your healthcare professional.• Please operate the treadmill according to this manual. Do not use any attachment or replacement partnot recommended in order to avoid accidents or injury.• Put the treadmill on a flat floor; keep the area 2 meters (6 feet) behind the treadmill clear. Do not putthe treadmill in a position where circulation of air can be blocked. Ideally put a rubber mat under thetreadmill to prevent the floor or carpet from damage and to help to avoid dust getting into thetreadmill.• When choosing the position of the treadmill, please be sure there is an outlet with a dedicated circuitnear that position.• Put the treadmill indoors to keep it free from moisture and dust. Do not use near pools or other areasof high humidity.• Do not operate where aerosol (spray) products are being used or where oxygen is thin.• Do not let children under 12 years old use the treadmill without supervision. Close supervision isnecessary when used by invalids, disabled persons and children.• This treadmill’s maximum load is 400 pounds or 180 kg.• The treadmill is only for one person to use. Keep all loose clothing including shoe laces and towelsaway from moving parts. Use proper athletic shoes, do not use with heals, cleats or spikes on shoes.• Connect the product to a properly grounded dedicated outlet only. Do not connect other appliances tothe same outlet or circuit.• Before stepping on the treadmill, please stand on the anti-slip pads on either side of the treadmillframe. Step on the treadmill after it begins to run. this will avoid unnecessary initial loads.