LAMAX Dots1 User Manual

Also see for Dots1: User guide User guide User manual

Contents

main features

LAMAX Dots1 User Manual Manual pdf 2 page image

PairingThe distance from your device to the earphones should not exceed one metrewhen pairing.Pairing both earphones1. Take the earphones out of the charging station and remove the protectivelabels. The earphones automatically connect to each other and a "Leftchannel / Right channel" voice message is heard.2. Press and hold the multi-function button on both earphones for 2 seconds atthe same time. The earphones switch on and automatically connect to eachother. After connecting, the left "Master" earphone goes into pairing mode.Pairing mode is indicated by alternate flashing of the white and blue LEDs onthe earphones. The right earphone is in standby mode and the blue LED onit flashes once every 7 seconds. Activate Bluetooth on your device and set upa new Bluetooth device. Select "LAMAX Dots1" from the list of found devices.After successful pairing, a beep sounds. When the second earphone is pairedautomatically, you hear the notification "Second device connected".If the pairing of the earphones has not worked properly, please turn off bothearphones. Then press and hold the multi-function button on both earphonesfor 4 seconds until the white and blue LEDs flash alternately. The earphonesautomatically connect to each other and the blue LED flashes twice every2 seconds. The "Left channel / Right channel" voice message is heard. Continuefrom step 2.Pairing one earphoneTo turn on the earphone, press and hold the multi-function button for4 seconds until the beep sounds and the white and blue LEDs flash alternately.Activate Bluetooth on your device and set up a new Bluetooth device. Select"LAMAX Dots1" from the list of found devices.After successful connection, the blue LED flashes once every 7 seconds.ChargingTo charge using the charging station, connect the cable to the Micro USB porton the back of the charger and plug the other end of the cable into a USB powersupply with a maximum voltage of 5V. The flashing blue LED on the chargingstation indicates its charging status. At full charge, the blue LED lights up.The charging time for the earphones is approximately 2 hours. The white LEDon the earphones remains on until the earphones are charged and switches offwhen they are fully charged. When removing the earphones from the chargingstation while charging, the earphones automatically switch on.Main Features- Cable-free, wireless transfer via Bluetooth 4.2- Automatic pairing between earphones- Lightweight earbuds with minimalistic "invisible" design- Pure, rich sound across the entire frequency range- Ability to charge the battery while in motion using the charging station- Handsfree calling- Control music and calls directly on the earphones- 3 earplug sizes and ear hooks come as part of the packageParametersWireless technology Bluetooth 4.2Maximum pairing distance up to 10 metresBattery in earphones 100 mAh LiPoBattery in charging station 520 mAh LiPoEarphone charging time about 2 hoursPlayback time up to 6 hoursStandby mode up to 150 hoursEarphone dimensions 16 x 21 x 25 mmEarphone weight 4.2 gWeight with charging station 49.3 gThe current version of user guide can be downloaded from here:http://beat.lamax-electronics.com/Dots1/manuals

/ 2

Related manuals for LAMAX Dots1