LAMBORGHINI ECO P N Series Instructions For Use, Installation And Maintenance

Contents

LAMBORGHINI ECO P N Series Instructions For Use, Installation And Maintenance Manual pdf 19 page image

ECO P N44 ENcod. 3541S060 - Rev. 00 - 05/20193. Service and maintenanceAll adjustment, commissioning and maintenance operations must be carried out by Qualified Personnel in compliance withthe current regulations. The personnel of our sales organization and the Local After-Sales Technical Service are at yourdisposal for any further information.LAMBORGHINI declines any liability for damage and/or injury caused by unqualified and unauthorised persons tamperingwith the unit.3.1 CommissioningChecks to be made at first lighting, and after all maintenance operations involving disconnection of the systems or anyoperation on safety devices or parts of the burner:Before lighting the burner•Make sure the burner is correctly fixed in the boiler with the preliminary settings indicated above.•Make sure the boiler and system are filled with water or diathermic oil, the plumbing circuit valves are open and thatthe flue is free and correctly sized.•Check closing of the boiler door, so that the flame is only generated inside the combustion chamber.•Check the correct positioning of the auger and the burner connection flexible tube.•Fill the hopper with pellets.•Check the correct positioning and connection of the temperature probe.AMake sure the grille (detail 1 - fig. 12) is clean.fig. 12 - Burner grilleBurner lighting•Switch on the power, operating the main switch ahead of the burner.•To fill the auger with pellets, see sec. 2.4.•close the thermostat line (boiler/room).