LASIAN BIOSELF User And Installation Manual
                                            | |
Contents
| 
COD. 79101EN.00 11/2013123. FUELThe multi-fuel boiler is designed to burn fuels derived from solid biomass:Wood pellet: is a fuel made from compacted sawdust extracted from the remains of the production and processingof dried natural wood; the compactness of the product is guaranteed over time by a natural substance contained inthe wood: the lignin. The typical form resembling small cylinders is achieved by wire drawing.On the market there are various types of pellet with quality and features that change depending on the kind ofproduction and type of wood materials used.Solid biomass: biomass is a type of fuel recovered and produced directly or indirectly from the disposal ofindustrial processing, from substances such as olive, almond, hazelnut, rape or pruning cuts, or from the disposalduring wood processing or the remains. These fuels are materials such as shredded vegetables including olive pits,almonds or hazelnut shells; other types are the pellet boiler and pellet olive of a diameter of 6 or 8 mm. etc. ThisLASIAN boiler has an ash cleaning system that allows these fuels to be used in the devices, choosing the specificprogram that is already recorded for the fuel we use:FUEL PROGRAMS:Combustible 1 DIN PLUSCombustible 2 PELLET QUALITY MEDIUMCombustible 3 PELLET QUALITY LOWCombustible 4 OLIVE PITSCombustible 5 SHREDDED ALMOND SHELLThe importation of these programs can be found in chapter 8 Operation of the control panel, in theparagraph 8.6.ATTENTION!The boiler is provided with two burners, one for the pellets and shredded almond shellcombustion (which is factory assembled) and another specific burner for olive pits combustion.When you select the program “Combustible 4” for burning olive pits, the pellet burner must bereplaced by the olive pits burner, which has smaller holes.The following types of fuel are excluded for its use; splinters - wood chunks - branches ingeneral.Because the characteristics and fuel quality influence significantly in the autonomy, performance andproper operation of the boiler, it is advised to:AVOID the use of fuel containing powder of mixed sawdust, resins or chemical, additional or binder substances.AVOID the use of wet fuel.The choice of unsuitable fuel causes:- brazier and smoke exhaust dust jam,- increase in fuel consumption,- decrease in performance,- does not guarantee the normal operation of the boiler,- glass dirt,- production of unburned granules.The presence of moisture in the fuel increases the volume of the capsules and breaks them causing:- malfunctions of the load system,- bad combustion.Fuel must be stored in a dry place and special attention must be paid to the handling of the sacks in order to avoidgrinding them and form sawdust.In order to use a fuel with size and calorific characteristics calorific different to the ones specified, it could benecessary to modify the operating parameters of the boiler. Should that be your case, contact an authorized servicecenter. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine