○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○© Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103 3User tipsPlease read the manual prior to using for the first time and keep it in asafe place for future use.Target group The documented information in this manual refers to the appliance, placeof use, transport, storage, assembly, use and maintenance.This manual is directed to the following target groups:• User• Service technicians/maintenance techniciansEspecially observe the chapter „safety instructions and generalinstructions“.Knowledge of PC and Microsoft-operating systems are assumed. Gene-ral knowledge in the area of automation technology is recommended.Diagram convention [Key] Key entries by the user are shown in squared brackets, forexample [CTRL] or [DEL]italic Names of pushbuttons to be used, menus or other screenelements as well as brand names are shown in italic letters.Necessary basic knowledge A solid Knowledge of the personal computer and Microsoft-operatingsystems is assumed and a general knowledge in the area of automationtechnology is recommended.Approbation’s & standards You will find information in the annex, chapter „certificate and guide lines“.Safety instructions Anywhere in the automation equipment, where dangerous errors may occur,i.e. that an occurring error may cause major material or personal damage,additional external precautions or facilities have to be made (for exampleby means of independent limit switches, mechanical interlocks etc.), whichin case of an error guarantee or enforce a secure operating condition.The test and aptitude of the intended usage by the user res. the usageunder operational conditions is the responsibility of the user. ThereforeElektronik-Systeme LAUER does not assume liability.