LAUNCH X431 EURO TAB User ManualiCopyright InformationCopyright © 2017 by LAUNCH TECH. CO., LTD. All rights reserved. No part ofthis publication may be reproduced, stored in a retrieval system, or transmittedin any form or by any means, electronic, mechanical, photocopying, recording orotherwise, without the prior written permission of LAUNCH. The informationcontained herein is designed only for the use of this unit. LAUNCH is notresponsible for any use of this information as applied to other units.Neither LAUNCH nor its affiliates shall be liable to the purchaser of this unit orthird parties for damages, losses, costs, or expenses incurred by purchaser orthird parties as a result of: Accident, misuse, or abuse of this unit, orunauthorized modifications, repairs, or alterations to this unit, or failure to strictlycomply with LAUNCH operating and maintenance instructions. LAUNCH shallnot be liable for any damages or problems arising from the use of any options orany consumable products other than those designated as Original LAUNCHProducts or LAUNCH Approved Products by LAUNCH.Trademark InformationLAUNCH is a registered trademark of LAUNCH TECH CO., LTD. (LAUNCH) inChina and other countries. All other LAUNCH trademarks, service marks,domain names, logos, and company names referred to in this manual are eithertrademarks, registered trademarks, service marks, domain names, logos,company names of or are otherwise the property of LAUNCH or its affiliates. Incountries where any of the LAUNCH trademarks, service marks, domain names,logos and company names are not registered, LAUNCH claims other rightsassociated with unregistered trademarks, service marks, domain names, logos,and company names. Other products or company names referred to in thismanual may be trademarks of their respective owners. You may not use anytrademark, service mark, domain name, logo, or company name of LAUNCH orany third party without permission from the owner of the applicable trademark,service mark, domain name, logo, or company name. You may contact LAUNCHby visiting the website at www.cnlaunch.com, or writing to LAUNCH TECH. CO.,LTD., Launch Industrial Park, North of Wuhe Avenue, Banxuegang, Bantian,Longgang, Shenzhen, Guangdong, P.R.China, to request written permission touse Materials on this manual for purposes or for all other questions relating tothis manual.(C) Diagtools & Launch Europe www.diagtools.lv, Riga, Pernavas 43A, LV-1009, t. +371 67704152, +371 29416069