X-431 Throttle User Manual9912.4.5 File management<1> Save snapshotWhile viewing sampling data, tap and then [Save Snapshot] to store thecurrent screen.<2> Snapshot managerWhile viewing sampling data, tap and then [Snapshot Manager] to enter.View, delete and edit operations are supported.<3> Record waveformThis function is used to record input waveforms that are acquired by theScopebox at a specific period, and save it as waveform file which can berecalled in future.It can be performed only when the Scopebox is collecting data in Normal mode.Tap , then select [Record] from the pop-up menu to start recording.Fig. 12-12Tap [Start] to start recording with a minimum record length of 10 frames, and[Stop] to stop recording. While recording, the recorded pages will be shown onthe screen.<4> Load waveform for playbackThe Import function enables you to import the stored waveform file for playbackand review. During replaying, the Scopebox stops collecting data automatically.Tap , then select [Waveform replay] from the pop-up menu to enter:
