LELY WELGER AP 530 Operator's Manual
                                                                                              | |
Contents
| 
80 LELY WELGER AP 530 AP 630 AP 730 AP 8305.3 Lubrication ChartDanger! Repairs, maintenance or cleaning work onthe machine - drive elements may start moving.Effect: Danger to life, injuries or damage to the machine.• Switch off the PTO, the tractor engine and remove the ignitionkey.• Disconnect PTO shaft.• Secure the machine and tractor against rolling back.• After repair, maintenance and cleaning work mount allprotective coverings and safety devices again.• Avoid skin contact with lubricants, cleaning agents andsolvents.• All other safety instructions must also be followed.Apply two strokes of multi-purpose grease slowly with ahandgun to the greasing points [1]. Remove superfluouslubricants.Note!The information on maintenance intervals is based on averageload of the machine. If the load is heavier or the machineoperates under extreme working conditions, the maintenanceintervals have to be reduced.DailyLubricationMachine part Lubricant Number of greasing pointsCross feeder bearing [3], Figure 87 Multi-purpose grease 1Packer bearing [4], Figure 87 Multi-purpose grease 1Examine and lubricate, if necessary:Bearing plate on cross-feeder and packer [3-5]Figure 87 Multi-purpose grease 4 (6)WeeklyLubricationMachine part Lubricant Number of greasing pointsNeedle operating rod [1], Figure 85 Multi-purpose grease 1Tying mechanism coupling [2] [8], Figure 85 Multi-purpose grease 2 (3 on wire tying)PTO shaft, Figure 86 Multi-purpose grease 2 + tubeExamine and lubricate, if necessary:Gearbox [A], Figure 85 Oil SAE 90Tire pressureHydraulic Oil P23 HL 46 |
manualsdatabase
Your AI-powered manual search engine