74. Now you have hand free function with the Bluetooth speaker.5. Press “ (10)” button again to hang up the call when finished. And,6. The paused music will start to play automatically.7. Press and hold “ (10)” button for 3 seconds to ignore the incomingcall.Tip: speak to the “MIC (3)” hole direct with distance in 30 ~ 60cm to getthe best speakerphone performance when necessary.Notice: The calling function is on main unit only when two speakers areconnected together.J. Redial For Last Call Function1. To redial for last called number by the Bluetooth Speaker, even it is inmusic playing mode.2. Press twice the “ (10)” button to enter into redial function, theplaying will pause and switch to hand free function for redial.3. Press the “ (10)” button again to hang up the redial call.4. Make sure that your mobile phone has last dial call used, if not, theredial for last call function cannot be activated.K. AUX IN Function1. In power ON mode, connect the Bluetooth Speaker’s “AUX IN Jack (4)”with an external device’s “Earphone/AUX/LINE” Output through theAudio cable (Supplied).2. In Bluetooth connecting two speakers with music playing mode, whenyou insert AUX in into the main unit, both units will be disconnectedfrom Bluetooth. When you insert AUX in into the slave unit, the mainunit is still working. When you disconnect the Aux in, you need toreconnect these two units again.3. The Bluetooth Speaker will switch to “AUX In” mode automaticallyfrom Bluetooth mode, and the “Bluetooth LED (7)” indicator willswitch to long light from blinking.4. Now the “AUX In” Function is ready, start to music play from yourexternal device by it control and or program, for example, Play, Stop,volume control…etc.5. You also can use Bluetooth Speaker control;6. Press and hold the “ (9)”button to increases the volume level.7. Press and hold the “ (8)” button to decreases the volume level.8. When maximum or minimum volume is reached, a series of tones willsound.9. Disconnect the Audio cable when it is done.L. Low Power Reminder And Auto Sleep