LENCO CD-X9B User Manual

— 4 —POWER SUPPLY1. Using Battery: open the battery compartment door at the bottom,correctly install 6(1.5V “C” Size) batteries according to the directionshown in the battery room, then cover the cell door.2. AC Power: plug one end of the AC power cord into the AC powerjack of this product, and plug the other end into the 120V householdpower outlet.NOTE:This product can only use the AC power supply voltageindicated on the manual or the casing.NOTE:1. When unplugging the AC power cord, hold the plug by hand insteadof pulling the power cord.2.Never touch the AC power plug when your hands are wet,otherwise itmay cause electric shock.3. The power cord should be fixed to avoid twisting or trampling.4. Do not use power sockets with too thin and extended wires.If theOutlet is overloaded, it will cause fire or electric shock.5. If the product is not used for a long time, Please unplug the AC powerplug from the socket and take out the dry battery to prevent the batteryfrom leaking and damaging the parts.