LENCO IR-2002 Instruction Manual

Contents

technische daten

UK-1SAFETY PRECAUTIONS- Read all the instructions carefully before using the unit and keep them for future reference.- Check that the voltage marked on the rating label matches your mains voltage.Location of Unit- The unit must be placed on a flat stable surface and should not be subjected to vibrations.- Do not place the unit on sloped or unstable surfaces as the unit may fall off or tip over.- The mains socket must be located near the unit and should be easily accessible.- Avoid extreme degrees of temperature, either hot or cold. Place the unit well away from heat sourcessuch as radiators or gas/electric fires. Avoid exposure to direct sunlight and other sources of heat.- Never place any type of candle or naked flame on the top of or near the unit.- To reduce the risk of fire, electric shock or product damage, do not expose this unit to rain, moisture,dripping or splashing. No objects filled with liquids, such as vases, should be placed on the unit.- If you spill any liquid into the unit, it can cause serious damage. Switch it off at the mainsimmediately. Withdraw the mains plug and consult your dealer.- To prevent the risk of electric shock or fire hazard due to overheating, ensure that curtains and othermaterials do not obstruct the ventilation vents.- Do not install or place this unit in a bookcase, built-in cabinet or in another confined space, ensurethat a minimum of 10cm should be kept around the apparatus for ventilation.Safety- Always disconnect the unit from the mains supply before connecting/disconnecting other devices ormoving the unit.- Unplug the unit from the mains socket during a lightning storm.- This unit will become warm when used for a long period of time. This is normal and does not indicatea problem with the unit.DANGEROUS VOLTAGEConductor dangerous voltage, that may be of sufficient magnitude to constitute a risk ofelectric shock to persons is present within this product's enclosure.ATTENTIONThe owner's manual contains important operating and maintenance instructions, for yoursafety, it is necessary to refer to the manual.Mains Cable- Make sure the unit is not resting on top of the mains cable, as the weight of the unit may damage themains cable and create a safety hazard.- If the mains cable is damaged it must be replaced by the manufacturer, its service agent, or similarlyqualified persons in order to avoid a hazard.Interference- The normal function of the product may be disturbed by Strong Electro Magnetic Interference. If so,simply reset the product to resume normal operation by following the instruction manual. In case thefunction could not resume, please use the product in other location.- This unit includes micro-processors which may malfunction as a result of external electricalinterference/noise or electrostatic discharge. If the unit is not working properly, disconnect thepower source and then reconnect it.Supervision- Children should be supervised to ensure that they do not play with the unit.- Never let anyone especially children push anything into the holes, slots or any other openings in thecase - this could result in a fatal electric shock.Service/Maintenance- To reduce the risk of electric shock, do not remove screws. The unit does not contain any user- Serviceable parts. Please leave all maintenance work to qualified personnel.- Do not open any fixed covers as this may expose dangerous voltages.- Ensure to unplug the unit from the mains socket before cleaning.- Do not use any type of abrasive pad or abrasive cleaning solutions as these may damage the unit'sSurface.- Do not use liquids to clean the unit.CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPEN