LENCO LS-430BK User Manual

Also see for LS-430: User manual User manual

18counter-clockwise.4. Tone Control4.1. The tone of this turntable could be adjusted by rotating the ToneControl knob.4.2. To be a brighter sound, turn the Tone Control knob clockwise.4.3. To be a deeper sound, turn the Tone Control knobcounter-clockwise.NOTE:1. If the silent pause time between each track is longer than3 minute, the platter will stop spinning automatically to avoiddamaging the record. The indicator light will be red. To resumeoperation, press the START button.2. If the felt mat gets dirty, it can easily scratch the record, so removethe felt mat periodically and wipe off any dust.3. To prevent the record from scratches and warping, remove it afteruse.4. Do not use a disk stabilizer.AUX-IN OperationThis turntable includes an auxiliary audio signal input jack forconnecting external audio devices like MP3 players, CD players, andolder, non-dockable iPods so you can listen to your external sourcethrough the turntable's speakers.1. Use an audio cable (not included) with one 3.5 mm stereoconnection on each end of the cable.2. Plug one end into the AUX-IN jack on the turntable and the otherend to the Line Out jack of the audio device.3. Power on the turntable and audio device. The indicator light ofturntable is red.4. Press the MODE button again, the indicator light of turntable