LENCO LS-470 User Manual
Also see for LS-470: Manual
                                                                                                                                                                                                                                                                           |
10Turntable Platter and Belt Setup1. Turn the platter over and check the belt position.Make sure that the drivebelt is looped in the middleof the circle. The drive beltlocated too high or too lowin this circle may cause thedrive belt to fall off or speedto be unstable.2. Set the platter on the spindle.Make sure the platter is fully seated on the spindle.3. Place the belt on the motor pulley.Align one of the platter openings with the motor pulley, and whilepulling both ends of the red ribbon that comes attached to the belt,place the belt on the motor pulley, as per the diagram. When doing this,be careful not to twist the belt.HookBeltMotor pulleyStraight Twisted Wrong locationOpeningSpindlePlatterMotor Pulley |
Related manuals for LENCO LS-470
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine