LENCO PDR-03 Instruction Manual

3. General OperationMains Adaptor (supplied with the package)Connect the mains adaptor to the power socket on the rear panel.Get the best receptionExtend the telescopic aerial as far as it can go.Power on the unitSlide the Power ON/OFF to ON to turn on the radio. The radio willautomatically operate the quick scan.Wake up the unitPress the SLEEP/STBY button to turn on the unit, press and hold thesame button to turn to standby mode.Adjust the volumeRotate the Volume Knob to adjust the volume to a comfortable level.Listening to the radio at high volume level may destroy the hearing.Avoid listening at high volume level for long time.Sleep timerTo set the sleep time at power on mode, press the SLEEP buttonrepeatedly to select from Sleep off, 15/30/45/60/90 minutes. Whenthe time is out, the unit will enter standby mode.Select modesPress DAB/FM button to enter DAB mode or FM mode.FIRST TIME TO TURN ON THE UNITSlide the Power On/Off to switch on the radio, the unit will auto-scanthe stations it found. During scanning, the screen will display a slide barthat indicates the progress of the scan, and the amount of radio stationsthat have been found so far. Once the scan has finished, the radio willplay the first station it found. Scanning... 104