LENCO SCD-341BK User Manual

8POWER SUPPLYACConnect the power cord to the AC socket of the device. Connect power cord plug tothe household power outlet.DC6 x 1.5V “C” size batteries (Not included) into the battery compartment.POWER SORUCEPress the “POWER” button to turn the appliance ON or Standby.Press the “SOURCE” button to choose different modes.VOLUME CONTROLPress the “VOLUME +/-” button to adjust the volume level.ANTENNAUse Antenna to improve the signal reception.Extend the antenna.Adjust the position of the antenna for the best reception.FM RADIOPress the “SOURCE” button to select the FM mode.Press the “SCAN” button to find the nearest station.Press or hold the “TUNE +/-” button to search for automatic frequency of the neareststation.PRESET STATION30 memory preset station = FM Preset memory is in the power failurePRESET STOREPress the “TUNE +/-” button to select the radio station.Hold the “PRESET” button to preset store mode.Press the “SKIP +/-” button to choose the number of preset station (From 1 to 30).Press the “ENTER” button to confirm the selection.Hold the "SCAN" button to do full scan. Some stations are automatically stored withsuitable signal strength.After the search is completed, the first stored station is broadcast automatically.