LENCO SCD-38 USB User Manual

Also see for SCD-38 USB: User manual User manual Instruction manual

Contents

18TroubleshootingPlease refer to the following instruction when there are problems with the unit.If the problem still exits, please consult your dealer.Problem RemedyCheck the AC power cord.Check the batteriesThe unit does not turn onCheck the FUNCTION switch.GeneralThere is no sound Adjust the volume"- - -" or "nl" Appears in thedisplay Is the disk format supported?Is the CD compartment closed?Take out the CD and leave theCD DOOR open for about an hourto dry moisture condensationMake sure the CD is notscratchedClean the CDMake sure the FUNCTION switchis at CD/USB/AUX IN positionCD does not playIf connected; disconnect the audiocable from the AUX IN jack.Clean the CD, or replace it if theCD is badly damagedPlace the player in a location freefrom vibrationThe sound drips outCheck if your batteries are okayCD PlayerCD does not play while theradio continues to play onbattery powerIt is normal since the radio usesless power than the CD player.Replace the batteries to be ableto playback the CD again.Radio The sound is weak or haspoor qualityReplace all the batteries with newones, or bring the set near awindow, or rotate the set/antenna

/ 20

Related manuals for LENCO SCD-38 USB