LENCO SCD-580 User Manual

Contents

3English SCD-580CAUTION:Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardousradiation exposure.This unit should not be adjusted or repaired by anyone except qualified service personnel.PRECAUTIONS BEFORE USEKEEP THESE INSTRUCTIONS IN MIND:1. Do not use this device near water.2. Clean only with a slightly damp cloth.3. Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2”) free space aroundthe whole device.4. Install in accordance with the supplied user manual.5. * Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit point. Donot place heavy items on the power adaptor, which may damage it. Keep the entire device out of children’s reach!When playing with the power cable, they can seriously injure themselves.6. * Unplug this device during lightning storms or when unused for a long period.7. Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat-generating productsor naked flame.8. Avoid using the device near strong magnetic fields.9. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart the device following theinstruction manual. During file transmission, please handle with care and operate in a static-free environment.10. Warning! Never insert an object into the product through the vents or openings. High voltage flows through the productand inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do not spillwater or liquid on the product.11. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.12. Do not use this device when condensation may occur.13. Although this device is manufactured with the utmost care and checked several times before leaving the factory, it isstill possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build-up ofheat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.14. This device must operate on a power source as specified on the specification label. If you are not sure of the type ofpower supply used in your home, consult your dealer or local power company.15. * The socket outlet must be installed near the equipment and must be easily accessible.16. * Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.17. * Devices with class 1 construction should be connected to a main socket outlet with a protective earthed connection.18. * Devices with class 2 construction do not require a earthed connection.19. Keep away from rodents. Rodents enjoy biting on power cords.20. * Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can cause a shortcircuit.21. Avoid placing the device on any surfaces that may be subject to vibrations or shocks.22. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids. To remove severe stains, you mayuse a damp cloth with dilute detergent.23. The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device orbattery replacement.