La Cornue Grand-Maman 90 Installation Manual

Contents

La Cornue Grand-Maman 90 Installation Manual Manual pdf 23 page image

23Installation Guide - “Cornuchef” RangeIGNITION – ADJUSTMENTS Starting the appliance1.11. Baking stone function (option for electric ovens)The “baking stone” optionconsists of:a refractory stone, a 3000Welectric heating element anda stainless steel bread spatula.To start using your “bakingstone”, you must followthese instructions:- Remove the cover from thebaking stone heating elementplug (at the back of theoven).- Attach the heating elementby inserting it into thecorresponding plug.- Place the “shelf” grill in thecentre of the oven (2nd level) and then place the baking stone on the grill.- Position the selector switch (D) to the “baking stone” position (in top) and the thermostat(B) to the desired temperature.- After preheating (between 10 and 15 minutes depending on the desired temperature),you can then place your food to cook in the oven.The baking stone can also be preheated by setting the selector switch (D) to the “oven floor” position(in bottom) and the thermostat (B) to about 220°C. After preheating (between 15 and 20 minutes),position the selector switch to the “baking stone” position in top and place the food to cook in the oven.After cooking on the baking stone, leave it in the oven to cool down. Then, remove thestone and the heating element from the oven, and replace the plug cover on the plug atthe back of the oven.The light is located on the side at the top of the oven; it isautomatically switched on when the oven door is opened.Please note: disconnect your oven before interfering withthe light to prevent any risk of an electrical shock and toallow the appliance to cool down (if necessary).Remove the protection glass and then unscrew thedamaged light.Refit a new light and the protection glass.2. REPLACING THE OVEN LIGHTcover plugstoneheatingelementGrill on the2nd level