Model: W86111 www.lacrossetechnology.com/support pg. 2POSITION CLOCK .................................................................................. 6POSITION OUTDOOR SENSOR ........................................................... 7SPECIFICATIONS ................................................................................... 7CARE AND MAINTENANCE ................................................................... 8WARRANTY AND SUPPORT INFORMATION ....................................... 8FCC STATEMENT .................................................................................... 9INITIAL SETUPStep 1: Insert 2 new AA batteries (not included) into theTX141v2 sensor. Observe the correct polarity. The redLED will flash when transmitting.Step 2: Insert 3 new AA Alkaline batteries (not included) intothe clock. Observe correct polarity.Step 3: After 5 minutes, place the sensor outside in a shadedlocation. Maximum range is 300 feet (91 meters) open air.Note: If the outdoor Temperature area shows dashes after 3minutes, remove the batteries and start from step 1.