La Crosse Technology C84612 Hardware Manual

Also see for C84612: Information Quick setup guide

La Crosse Technology C84612 Hardware Manual Manual pdf 17 page image

P a g e | 17W IND GUST ALARM1. The wind gust alarm display will show.2. Press and hold the SET button for about 2 seconds. The wind gustdigit will flash.3. Press the ▲/DATE button or ▼/RAIN button to set the wind gustalarm value.4. Press the ALARM button to confirm the setting. The digit will stopflashing.5. Press the SET button to switch on or off the alarm. The iconindicates the alarm is switched on.6. Press the ALARM button to move to the wind direction alarm.W IND DIRECTION ALARMMultiple wind direction alarms can be set simultaneously if desired.1. The wind direction alarm display will show.2. Press and hold the SET button for about 2 seconds. The wind directionarrow on the outside of the compass circle will flash with thecorresponding compass direction or degrees reading displayed in thecenter of the compass.3. Press the ▲/DATE button or ▼/RAIN button to move the wind directionalarm pointer.4. Press the SET button to set a wind direction alarm value. A pointer iconwill appear inside of the compass circle to indicate an alarm setting forthat wind direction.5. To remove an alarm setting for a wind direction, press the SET button again to remove theselected wind direction alarm. The arrow icon inside the compass circle will disappear.6. If more than one wind direction is desired as an alarm setting, Press the ▲/DATE button or▼/RAIN button to move the wind direction alarm pointer to the next desired setting.7. Press the SET button to confirm the next wind direction value. A pointer icon will appear inside ofthe compass circle to indicate an alarm setting for that wind direction. You can set as many winddirection alarms as you desire.8. Press the ALARM button to confirm the setting. The digit will stop flashing.9. Press the SET button to switch on or off the alarm. The icon indicates the alarm is switchedon.10. Press the ALARM button to move to the 24-hour rainfall alarm.24 HOUR RAINFALL ALARM1. The 24-hour rainfall alarm display will show.2. Press and hold the SET button for about 2 seconds. The 24-hourrainfall digit will flash.3. Press the ▲/DATE button or ▼/RAIN button to set the 24-hourrainfall alarm value.4. Press the ALARM button to confirm the setting. The digit will stopflashing.5. Press the SET button to switch on or off the alarm. The iconindicates the alarm is switched on.6. Press the ALARM button to exit the alarm setting mode.HYST ERESIS