La Crosse Technology S84193 Instruction Manual

Contents

La Crosse Technology S84193 Instruction Manual Manual pdf 3 page image

3FeaturesOutdoor temperature (ºF / ºC)Signal strength icon for sensor transmissionOutdoor temperature trend indicatorOutdoor temperature alerts (low/high)Outdoor humidity (%RH) with trend indicatorAnimated forecast iconsForecast tendency indicator12/24 hour atomic time and date (manual setting)Perpetual calendar (day / month / date)Indoor temperature (ºF / ºC)Indoor temperature trend indicatorIndoor temperature alerts (low/high)Indoor humidity (%RH) with trend indicatorBacklight control (high / low / off)Outdoor heat index and dew pointMinimum and maximum in / out temperatureStation and sensor low battery iconSnooze / alarm icon• Sits on desktop or tabletopInitial Setup1. Insert A/C adapter into the wall outlet then into the weather station or insert 3-AAA Alkaline batteries (notincluded) into the weather station (see Power the Weather Station).2. Insert 2-AA Alkaline batteries into the transmitter, observing the correct polarity (see Install Batteries in theOutdoor Transmitter).3. Keep the transmitter 5-10 feet from the weather station for 15 minutes to establish a good connection.4. Within 3 minutes the station will beep and the outdoor temperature should show on the weather station. Ifthe outdoor temperature does not show after 3 minutes remove power from the transmitter and the weatherstation for 60 seconds and start again from step 1.5. For optimum 433 MHz transmission, the outdoor transmitter should be placed a distance of no more than200 feet (60 meters, open air) from the weather station.IMPORTANT:Do Not Mix Old and New BatteriesDo Not Mix Alkaline, Standard, Lithium or Rechargeable Batteries