Version 1.8 - 9/23/2008Page 16 of 25 There are four speeds available – “1” is the slowest and “4”is the fastest Press the “+” Key to change the scroll speed. Press the “SET” Key to save the current settings andadvance to the next optionSet Mode 4 - View Device ID NOTE: Device ID is a reference item for customer service only. You may pressthe “SET” Key again to exit SET mode if you are not asked to provide thisnumber by customer service. Press the “SET” Key until “SEC 1” appears at the top The first part of the Device ID will appear at the bottom Press the ‘+” Key to view second part of the Device ID under“SEC 2” Press the “SET” Key to exit SET modeFactory Reset of Wireless Display NOTE: It is not possible to re-register a previously registered Wireless Displayunder a new account until the Wireless Display has been deleted from the useraccount on www.weatherdirect.com and a Factory Reset has been performed. NOTE: Expansion Options that are Lifetime Upgrades are still active on yourWireless Display even if you delete it from your user account onwww.weatherdirect.com or perform a Factory Reset. The selection of locationsand other custom settings will need to be performed again if the Wireless Displayis re-registered. WARNING: The Factory Reset procedure will erase any registration and setupinformation from your Wireless Display. You must register the Wireless Displayagain with www.weatherdirect.com to use it after a Factory Reset. WARNING: Deleting the Wireless Display from a user account onwww.weatherdirect.com will erase the weather and other setup information suchas forecast locations from the Wireless Display.If you have trouble registering your Wireless Display after multiple attempts, youcan try a Factory Reset.If you wish to give your Wireless Display to someone else or simply to register itunder a different user account, you must perform the Factory Reset to clear theregistration information from the memory of the Wireless Display and delete thedevice from the user account on www.weatherdirect.com