La Crosse Technology WS-1912 Instruction Manual

Contents

La Crosse Technology WS-1912 Instruction Manual Manual pdf 3 page image

5 LCD contrast selectable Low battery indicator Storage of 140 sets of history weather data recorded in 3-hour intervals Wireless transmission at 915 MHz Transmission range up to 330 feet/100 metersThe Thermo-hygro Transmitter Remote transmission of the outdoor temperature and humidity to theWeather Center at 915 MHz (open air) Rain resistant casing Wall mounting case (to be mounted vertically in a sheltered place.Avoid direct rain and sunshine)The Wind sensor Connected to the thermo-hygro transmitter bycable Can be installed onto a mast or a horizontalpanel (with the cups on the bottom)The rain sensor (optional- sold separately) Remote transmission of the rainfall data to theWeather Center at 915 MHz To be mounted onto a horizontal panel(TX32U-IT)6Cable connection between the wind sensor andthe thermo-hygro transmitterOPTIONALWireless transmissionat 915 MHz – Rainsensor to weatherstationWirelesstransmission at915 MHz - thermo-hygro transmitterto weather stationWeather centerWind sensorRain sensor (optional)Thermo-hygrotransmitterSETTING UP:Note:When putting the Weather Station into operation, it isimportant to completely setup the wiring and rest of thesystem in close proximity (e.g. on a table 5ft from display)and test all components for correct function before placingand mounting them at their final destinations (SeePositioning below) (Allow all sensors to sit with the displayunit for 15 minutes before mounting)1. First, unwind the cables of the Wind sensor. Connectthe Wind sensor to the Thermo-hygro transmitter byplugging the connector head into the socket of theThermo-hygro sensor.Socket for windsensor