La Crosse Technology WS-3502 Operation Manual

Contents

La Crosse Technology WS-3502 Operation Manual Manual pdf 13 page image

37Note:It will take 5 minutes for the factory reset process. During this period,the text “Factory Reset In Progress” will be shown. After the resetprocess is finished, the LCD will switch off and the text “RemoveBattery” will be displayed. Remove the battery and perform systemstart again. See “3 - Putting into Operation” paragraph.Leaving the basic settings procedure (Setup Mode) with ٭EXIT٭.5 Display of stored Min/Max Values and Alarm ValueSettingsNamed values are in each case upon recall being simultaneouslydisplayed and flashing in their respective display sections.To recall named measuring and alarm values the menu shown belowwill have to be activated by touching the Touch Screen in the center ofthe text display section (last two lines at the bottom of the LCD). Thedisplay of the values is started by touching the displays ٭MINMAX٭ or٭ALARMS٭.The continuance of the recalling process is essentially self-explanatory.With ٭MINMAX٭ the below shown menu step is activated, which inreturn leads to the displays of the stored Min/Max values by use of٭MIN٭ / ٭MAX٭ resp., which on their part again can be directlyselected.Note: During individual displays of the stored Min/Max values the topline of the LCD screen will automatically display the time anddate of their storage.