La Crosse Technology WS-7016U Instruction Manual

Also see for WS-7016U: Instruction manual Instruction manual

La Crosse Technology WS-7016U Instruction Manual Manual pdf 1 page image

1WS-7016UWireless 433 MHzTemperature StationInstruction Manual2TABLE OF CONTENTSTopic PageInventory of Contents 1Additional Equipment 1Quick Setup 2Detailed Setup GuideBattery Installation 3-6Remote Control Sender 3-4Indoor Temperature Station 5-6Setting the Time 7-8Selecting Units of Measurement 8FeaturesIndoor Minimum and MaximumTemperatures9Outdoor Minimum andMaximum Temperatures10-11Resetting the Indoor Minimumand Maximum Temperatures11-12Resetting the Outdoor Minimumand Maximum Temperatures12Reading the Temperature Trend 13Mounting3Remote Control Sender 13-16Indoor Temperature Station 16-18Using Multiple Remote Control SendersSetup of Multiple Units 18-21Viewing Remote ControlSenders21-22Features of the Multiple RemoteControl Senders22-23Troubleshooting 24-28Maintenance and Care Instructions 28-29Specifications 29-31Warranty Information 31-33FCC DISCLAIMER 34INVENTORY OF CONTENTS1. The Indoor Temperature Station (Figure 1)2. The Outdoor Remote Control Sensor(TX3U) and mounting bracket. (Figure 2)3. 3 each, 1/2” Philips screws.4. One strip of double sided adhesive tape.45. Instruction Manual and Warranty Card.ADDITIONAL EQUIPMENT (not included)1. 1 Philips screwdriver.2. 1 Flat screwdriver.3. 2 Fresh AA 1.5V batteries.4. 2 Fresh AAA 1.5V batteries.QUICK SETUP1. Insert two AAA batteries into the RemoteControl Sender.2. Insert two AA batteries into the IndoorTemperature Station.Figure 1Figure 2