La Crosse Technology WS-7038UF Instruction Manual
Also see for WS-7038U: Instruction manualInstruction manual
              | |
MOUNTINGNote: Before permanently mounting, ensure that the Rain Monitor is able to receivesignals from the Rainfall Transmitter at their desired location. Obstacles such as walls,concrete, and large metal objects can reduce the range. Place units in their desiredlocation, and wait approximately 15 minutes before permanently mounting to ensure thatthere is proper receptionI) THE TX5U—RAINFALL TRANSMITTERThe Rainfall Transmitter can be mounted in two ways:• simply placing it in a desired location, or• mounting it to a surface with the provided screws.Ensure that the Rainfall Transmitter is completely horizontal and stable.1) Rotate the rainfall collectorseparating it from the base.2) There are two cylindricalholes in the base to guidethe mounting screws. Placethe base over a desiredmounting surface. With apencil, mark the mountingsurface through thecylindrical holes.3) Where marked, start the screws.4) Place the base over mounting surface. Install screws through the cylindricalholes and into the started holes on the mounting surface.5) Secure the screws, ensuring that no part of the base can lift off the mountingsurface.6) Remove the manufacture tape from the teeter-totter on the base. If this isnot done there will be no way to measure rainfall, and no measurement willdisplay on the Weather Center.7) Place the rainfall collector onto the base. Place the 3 tabs (on the rainfallcollector) into the tab slots (on the base) and turn counter-clockwise.10 |
Related manuals for La Crosse Technology WS-7038U
manualsdatabase
Your AI-powered manual search engine