La Crosse Technology WS-7394U Instruction Manual

Also see for WS-7394U: Instruction manual Instruction manual

Contents

La Crosse Technology WS-7394U Instruction Manual Manual pdf 13 page image

13O. Forecast Sensitivity Setting1. Press and hold the “SET” button forfive seconds.2. “lcd” will appear at the top of thedisplay and a number will flash next toit.3. Press and release the “SET” buttonthirteen more times to advance to theForecast sensitivity setting.4. The two air pressure tendency arrowswill begin flashing on either side of theforecast icon and a flashing number willappear under the forecast icon.5. Press and release the “OUT/+” buttonto select the desired forecast sensitivity setting.Note: Barometric air pressure is usually reported as “relative airpressure”. This reading is based on the combination of absolute airpressure and altitude. In general, an increase in altitude will result in adecrease in air pressure. Relative air pressure will make readings innearby locations relative to each other to allow for proper forecasting.The absolute air pressure reading in the Weather Center cannot becalibrated, only the relative air pressure.6. Press and release the “SET” button to confirm the forecastsensitivity setting.THE MANUAL SETTING IS NOW COMPLETED