La Crosse Technology WS-8300U Instruction Manual

Contents

La Crosse Technology WS-8300U Instruction Manual Manual pdf 8 page image

8displayed. If they are not shown in LCD after 60 seconds, remove the batteriesand wait for at least 60 seconds before reinserting them.4. The outdoor temperature and humidity from the first sensor (channel 1) shouldthen be displayed on the Weather station. If this does not happen and the signalreception icon is not shown, after 2 minutes, the batteries will need to beremoved from both units and reset from step 1.5. Insert the batteries to the second sensor as soon as the outdoor temperature andhumidity readings from the first sensor are displayed on the Weather station.NOTE: You must insert the batteries into the second sensor within 30seconds of reception of the first sensor.6. The outdoor temperature and humidity from the second sensor and the "channel2" icon should then be displayed on the Weather station. If this does not happenafter 2 minute, the batteries will need to be removed from all the units and resetfrom step 1.7. Insert the batteries to the third sensor as soon as the "channel 2" icon andoutdoor data are displayed on the Weather station. Then within 2 minutes, thechannel 3 outdoor data from the third sensor will be displayed and the channelicon will shift back to "1" once the third sensor is successfully received. If this isnot happen, user shall restart the setting up from step 1.NOTE: You must insert the batteries into the third sensor within 30 seconds ofreception of the second sensor.IMPORTANT: Transmission problems will arise if the setting for multiplesensors is not followed as described above. Should transmission problemsoccur, it is necessary to remove the batteries from all units and start again theset-up from step 1.D. VIEWING AND OPERATING WITH MULTIPLE REMOTE SENSOR UNITS1. To view the temperature of a different thermo-hygro sensor unit, press and releasethe SET/CH button. A shift from one “boxed” number to the next should beobserved on the right side of the OUTDOOR LCD.2. To view the Minimum/Maximum temperature & humidity : first select from whichthermo-hygro sensor to read data (indicated by the “boxed” number). Pressing andreleasing the MIN/MAX button will toggle through the minimum and maximumindoor temperature, and the minimum and maximum outdoor temperature andhumidity.3. To reset the Minimum/Maximum readings, press and hold the MIN/MAX button for5 seconds.III. MOUNTINGNote: To achieve a true temperature reading, avoid mounting in direct sunlight. Werecommend that you mount the thermo-hygro sensor on an outside North-facing wall(under the eve of a house is ideal). The sending range is 330 feet; obstacles such aswalls, stucco walls, concrete, and large metal objects will reduce the range. Place theWireless Weather Station and thermo-hygro sensor in their desired locations before