La Crosse Technology WT-5431 Instruction Manual

Contents

La Crosse Technology WT-5431 Instruction Manual Manual pdf 4 page image

4QUICK SET-UP GUIDEHint: Use good quality Alkaline Batteries and avoid rechargeable batteries.1. Have the indoor station and outdoor remote 3 to 5 apart.2. Batteries should be out of both units for 10 minutes.3. Place the batteries into the outdoor remote first then into the indoor station.(All outdoor remotes must be started before the indoor station)4. DO NOT PRESS ANY BUTTONS FOR 10 MINUTES.In this time the display and sensor will start to talk to each other and the display willshow both the indoor temperature and an outdoor temperature. If the station does notdisplay both temperatures after the 10 minutes please retry the set up as stated above.After both indoor and outdoor temperatures are displayed for 10 minutes you can placeyour sensor outdoors and set your time.The remote sensor should be placed in a dry, shaded area. The remote sensor has a rangeof 80 feet. Any walls that the signal will have to pass through will reduce distance. Anoutdoor wall or window will have 20 to 30 feet of resistance and an interior wall willhave 10 to 20 feet of resistance. Your distance plus resistance should not exceed 80 ft. ina straight line.NOTE: Fog and mist will not harm your remote sensor but direct rain must be avoided.To complete the set up of your temperature station after the 10 minutes have passedplease follow the steps on page 7.