La Crosse Technology WT-5442 Instruction Manual

Also see for TX6: Instruction manual

Contents

La Crosse Technology WT-5442 Instruction Manual Manual pdf 7 page image

6Guide is laid out in a manner that allows you to program each functionseparately, or you can follow the instructions entirely to program theProjection alarm. Complete programming is usually done for the initialset-up, and will require you to skip step 1 of programming sections “D”through “H”. Press the “SNOOZE” button at any time to exit the ProgramMode, or wait approximately 15 seconds for the Projection Alarm toautomatically return to normal operation.A. PROGRAMMING SEQUENCEDefault (Factory) Setting1. Time Zone Setting -5 (eastern standard time)2. Daylight Saving Time ON/OFF ON3. Adjustable Snooze 10 Minutes4. Hour Setting 12: AM5. Minute Setting :006. Year Setting 01 (2001)7. Month Setting 1 (January)8. Date Setting 19. Day Setting MO (Monday)10. 12/24-hour Mode 12-hourB. FUNCTION BUTTONSThere are 8 function buttons;three on the front, four on theback and one on the top ofthe projection alarm. Thefunction buttons are labeled:ALM1/HOUR, ALM2/MIN,light intensity icon, DISPL,light direction icon, SET,MODE/+, and SNOOZE (thetop bar).C. TIME ZONE SETTING1. Hold down the “SET” button for 1 second, the time zone (“-5” default)will flash in the Date LCD.2. Press and release the “Mode/+” button to select the appropriate timezone. There are 13 time zones to choose from based relative to theinternational time standard of GMT (“Greenwich Mean Time”)(shownas “0h” on display).