Combogard 3040 Eng LA GARD Locks BVRevisie: 2 Vlijtstraat 40, NL-7005 BN DOETINCHEMDatum: 13-09-02 Tel: +31 (0)314 376876 Fax: 378188303530753750SPECIAL FEATURESB) Time Delay:If feature is active:After entering a valid code (double signal) the delay period starts, the LEDflashes at one second.At the end of the delay period the Open window starts, the LED flashes twiceper second and the lock beeps every 10 seconds.To open the lock, a valid code has to be entered during the Open window. Ifthe Open window expires without the lock being opened, it is automaticallylocked again.Delete current delay time: press random key.Extend current delay time: enter valid code. The delay period will start again.Time delay Override: Second code can open immediately. (When programmed)C) Dual combination operation:If feature is active:Two codes are required to open, both codes can be changed independently.Feature A (Manager Mode) is cancelled when programming the dualcombination operation.If Time Delay is active, one valid code will start the delay period. To open thelock, both codes have to be entered during the Open window.D) Hold-up alarm (silent alarm):If feature is active AND optional alarm box or SP-box is connected.If the last digit is chosen one higher or lower (+/- 1) when entering the code, thelock will open as usual (double signal), but at the same time the alarm box isactivated.Example: Combination 471147Alarm 471146 or 471148.E) Remote control:If feature is active AND optional alarm box or SP-box is connected.If six beeps and blinks follow upon the entry of a valid code, the lock is blockedby the alarm feature (remote control) and will not open. The alarm can besignalled as usual.Program alterations and/or connection to an alarm system can also be carried throughafterwards. Inquire with your dealer or visit us on Internet (http://www.lagard.en).USER INSTRUCTIONSCOMBOGARD 33E (3040)3035 = Rubber key entry3075 = Black foil entry3750 = Black foil entry with battery boxGENERALThe lock operates with a 6-digit code or word of 6characters. Ability to add a second User combination.Each entry is confirmed by a beep-and-blinksignal.A valid code is followed by a double signal, aninvalid code by a triple signal.After an interval of more than 10 seconds, thealready entered part of the code is deleted andthe entire sequence has to be re-entered.1. TO OPEN THE LOCKThe factory code is 1-2-3-4-5-6.Enter the code and (after double signal) turn the entryclockwise within 3 seconds unto the hold.The lock is open and the entry is rotated.If the lock is not entered within 3 seconds, it isautomatically locked again.2 . TO CLOSE THE LOCKTurn the entry counter-clockwise unto the hold.The lock is closed and the entry stands straight.3. WRONG TRY PENALTYAfter four invalid codes, the entry is blocked for about 5 minutes. During thisperiod, the lock signals at 10 second intervals. After this time penalty, the entry ofevery second invalid code initiates a new 5 minutes delay period.