La Marche MSM 10-12V Installation And Operation Manual

La Marche MSM 10-12V Installation And Operation Manual Manual pdf 2 page image

iiImportant Safety InstructionsBefore using this equipment read all manuals and other documents related to this unit and other equipmentconnected to this unit. Always have a copy of a units manual on file nearby, in a safe place; if a replacementcopy of a manual is needed it can be found at the www.lamarchemfg.com.Electrical SafetyWARNING: Hazardous Voltages are present at the input of power systems. The output from rectifiersand from batteries may be low in voltage, but can have a very high current capacity that may causesevere or even fatal injury.When working with any live battery or power system, follow these precautions: Never work alone on any live power system, someone should always be close enough to come to your aid Remove personal metal items such as rings, bracelets, necklaces, and watches. Wear complete eye protection (with side shields) and clothing protection. Always wear gloves and use insulated hand tools.WARNING: Lethal Voltages are present within the power system. Parts inside the unit may still beenergized even when the unit has been disconnected from the AC input power. Check with a meterbefore proceeding. Do not touch any uninsulated parts. A licensed electrician should be used in the installation of any unit. Always disconnect the unit from the supply, batteries and loads before performing maintenance or cleaning. If the unit is hot-swappable, simply remove it from the shelf for any maintenance or cleaning. Always assume that an electrical connection is live and check the connection relative to ground. Be sure that neither liquids nor any wet material come in contact with any internal components. Do not operate this unit outside the input and output ratings listed on the unit nameplate. Do not use this unit for any purpose not described in the operation manual.Mechanical Safety This unit or parts of the unit may get very hot during normal operation, use care when working nearby. Do not expose equipment to rain or snow. Always install in a clean, dry location. Do not operate equipment if it has received a sharp blow, been dropped, or otherwise damaged in any way. Do not disassemble this unit. Incorrect re-assembly may result in a risk of electric shock or fire.Battery SafetyWARNING: Follow all of the battery manufacturer’s safety recommendations when working with oraround battery systems. DO NOT smoke or introduce a spark or open flame in the vicinity of a battery.Some batteries generate explosive gases during normal battery operation. To reduce risk of arc, connect and disconnect the battery only when the unit is off. If it is necessary to remove the battery connections, always remove the grounded terminal from the batteryfirst. Remove personal metal items such as rings, bracelets, necklaces, and watches. Always wear rubber gloves, safety glasses, and a rubber lined vest/apron when working near a battery. Have plenty of fresh water and soap nearby in case the battery electrolyte contacts skin, clothing, or eyes. If the battery electrolyte contacts skin or clothing, wash immediately with soap and water. If the electrolyte enters the eye, immediately flood the eye with running cold water for at least ten (10) minutesand seek medical attention immediately. Do not drop metal on a battery. A spark or short-circuit could occur and could cause an explosion.