La Marche ULTRA SERIES Installation And Operation Manual

Contents

La Marche ULTRA SERIES Installation And Operation Manual Manual pdf 7 page image

73.1 Input AC ConnectionsConnect AC wiring to the equipment per the image shown below. Refer to section 3.3 for recommended wiresizes.3.2 Output DC ConnectionsConnect Ultracap/battery DC cables to the equipment per the image shown below. Refer to section 3.3 forrecommended wire sizes.Note: Verify that the connections are tight by tugging on the wires.CAUTION: When connecting the DC cables to the battery, be certain the positive terminal of thecharger is connected to the positive battery terminal and the negative terminal is connected to thenegative battery terminal.Note:All National and local wiring codes must be followed. Wire insulation must be rated 90C or higher.Figure 4 – Output ConnectionsFigure 3 – Input Connections