La San Marco PLUS 10 Series Installation And Use Manual

La San Marco PLUS 10 Series Installation And Use Manual Manual pdf 28 page image

Page 28 of 36SHIFT DOSES SLIGHT ADJUST PROGRAMMINGPLEASE NOTE : TO ACCESS TO THE SHIFT DOSES SLIGHT ADJUST THE MACHINE MUST BE AT THE SET-UP TEMPERATURE. THE SHIFT DOSES PROGRAMMING IS ENABLE FOR STANDARD AND WAITERS CONFIGURATION MACHINESONLY.By means of the Shift button, is possible to adjust other 10 doses for a total number of 20 drinks .To enter in Shift doses slight adjust programming mode, proceed as follows.WITH SMART-CARD: Insert the Owner or Roaster smart card into the proper slit and with the machine in OFF keep pressedthe Key N° 12 (Enter).WITH PASSWORD: Digit the Owner or Roaster password.The display shows :SelectDose programmingThe machine automaticallycarries out a reset cycle groupEnterSelectDoses slight adjustDoses slight adjust Select button EnterPress the key you want toslight adjust, the display showsTX XXXXXXXGrind time G1 +0%sGrind time G2 +0 %sTX XXXXXXXWater volume + 0 %ccTX  XXXXXXXFoamed milk +0 %sEnterTX  = Selected n°shift buttonXXXXXXX = Button namePress + / - to set+ / - 30 %+ / - 30 %+ / - 30 %TX XXXXXXXSteamed milk +0 % sEnterEnter+ / - 30 %Displayed only on Milk base drink type(coffee + milk - Milk)Doses slight adjust Select button SHIFTEnterTX  SteamSteam time + 0 %sTX  WaterWater time + 0 %sEnterTX SteamSteam temp. Xx ° C. 50-85 °cDisplayed only with Steam nozzle stop atset point enableEnterEnter+ / - 30 %+ / - 30 %