La Spaziale S8 Series Installation Instructions Manual

Contents

La Spaziale S8 Series Installation Instructions Manual Manual pdf 29 page image

espresso coffee machines278 9-LSI 089 - Rev. 00 - Ed. 04/20155.8 ELECTRONIC CONTROL BOARD SETTINGThe electronic control board can be set to control two different water level controls (probe or floater) andto control the two different versions of group delivery (EK or EP).The electronic control board has a selector for board configuration.WATER LEVEL CONTROLAccording to the type of boiler water level control, it is necessary to set the electronic control board as follows:• Move the selector to “S” if a PROBE water level control is used (conduction probe).• Move the selector to “R” if a FLOATER water level control is used (magnetic reed).GROUP DELIVERY CONTROLAccording to the type of group delivery control on the appliance, it is necessary to set the electronic control board as follows:• Move the selector to “EK” if a 5-selection touchpad is used with programmable doses (automatic version).• Move the selector to “EP” if a 1-key touchpad is used (semiautomatic version).Take note!These settings are made by the manufacturer during the testing phase!Only after replacing the electronic control board, make sure that the new board is pre-set in for the type of water level anddelivery controls on the appliance.